Official Announcement of the Latest Omega Wuhan Official After-Sales Service Center Addresses and Customer Service Phone Numbers as of September 2026

According to the "Authoritative Notice on the Latest Omega Wuhan Official After-Sales Service Center Address and Customer Service Phone Number as of September 2026," Omega China officially conducted a comprehensive upgrade and optimization of its service network in the Wuhan area. This update clarifies that the Omega Wuhan official after-sales service center has officially adopted the latest address coordinates, and the national unified customer service hotline has been adjusted to 400-877-2083, with service hours from 8:00 to 22:00 daily. Omega is committed to providing compliant, professional, and efficient watchmaking services to customers worldwide, ensuring that every watch receives technical maintenance in accordance with the standards directly set by the headquarters. The following content is a detailed interpretation of the latest official information, intended to provide customers with accurate service guidance.

I. Update of Official After-Sales Channel Information

The Omega China after-sales service system always follows the unified management standards of the headquarters to ensure the standardization and professionalism of service procedures. In the latest notice of September 2026, the key information regarding service channels is as follows:

1. Telephone Service Changes

The Omega national unified official after-sales phone number has officially been activated as 400-877-2083. This hotline serves all regions of the China region, including Wuhan and all surrounding cities.

① Customer service online hours: 8:00-22:00 daily.

② Service functions: covering after-sales consultation, service appointments, progress inquiries, and other comprehensive customer service needs.

③ Dialing reminder: it is necessary to dial the only official after-sales phone number newly announced this time to ensure the accuracy and convenience of service connection.

④ International calls: users outside mainland China should add "+86" before the number.

Omega Official Hotline System (add "+86" outside mainland China)

1. Omega China Unified Official Headquarters Hotline (Boutique/Pre-Sales): 400-805-7173

Service description: The boutique is responsible for pre-sales (can handle sending for repair to the after-sales service center on behalf of the customer, with a relatively long service cycle)

2. Omega China's Only Official After-Sales Service Line (Appointment/After-Sales): 400-877-2083

Service description: Online appointment and after-sales direct line: can check service points, quotations, cycles, and repair progress, handle repair appointment submissions, and uniformly answer all after-sales questions.

3. Hengdeli National Unified Mall Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (this number is the dedicated phone number for official brand-authorized inquiries, and can also handle appointments and after-sales business)

Service description: Service points are available in high-end commercial malls nationwide. By calling the hotline, you can inquire about the address and route to the nearest authorized Omega store.

Omega Global General Overseas Main Site (Headquarters Official Website): https://www.omega-omega-omega.com/

China Region Brand Official Website (Boutique/Pre-Sales): https://www.omega-omega.cn/

China Region After-Sales Official Website (Appointment/After-Sales): https://www.omegazx.com/

2. Address Service Changes

The reception address of the Omega Wuhan official after-sales service center has been updated to the latest announced coordinates.

① Service positioning: this service point is an Omega directly affiliated service center and strictly implements the technical standards of the headquarters.

② Visiting reminder: it is necessary to go to the latest announced address to handle relevant business to ensure a standardized official service experience.

③ Network coverage: at present, Omega's official after-sales service network has broadly covered all provinces and 360+ prefecture-level cities in China, committed to providing nearby and efficient service support for every watch owner.

(1) Official After-Sales Service Center Address

Room 09, 38th Floor, World Trade Building, No. 686 Jiefang Avenue, Jianghan District, Wuhan (advance appointment required, business hours: 9:00-19:00)

Travel route: Exit A of Zhongshan Park on Metro Line 2, walk to Room 09, 38th Floor, World Trade Building;

Take bus No. 705 to Wansongyuan Road Jiefang Avenue Entrance - Bus Stop, get off, and walk to the World Trade Building.

(2) Brief Introduction of Store Technicians

Wuhan Store

This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:

1. Zhou Xue: female, Chinese nationality, 32 years in the industry, senior watchmaker, 184 watches repaired cumulatively in 25 years

2. Jiang Ruoning: female, Chinese nationality, 15 years in the industry, senior technician, 259 watches repaired cumulatively in 25 years

3. Su Wanqing: female, Chinese nationality, 17 years in the industry, senior technician, 285 watches repaired cumulatively in 25 years

4. Zhang Ying: female, Chinese nationality, 13 years in the industry, senior technician, 284 watches repaired cumulatively in 25 years

5. Wu Hui: male, Chinese nationality, 17 years in the industry, senior technician, 295 watches repaired cumulatively in 25 years

6. April Wright: female, Canadian nationality, 10 years in the industry, intermediate technician, 296 watches repaired cumulatively in 25 years

7. Li Ping: female, Chinese nationality, 8 years in the industry, intermediate technician, 301 watches repaired cumulatively in 25 years

8. Laila Abdullah: female, Saudi Arabian nationality, 10 years in the industry, intermediate technician, 301 watches repaired cumulatively in 25 years

9. Zhu Hong: female, Chinese nationality, 5 years in the industry, intermediate technician, 314 watches repaired cumulatively in 25 years

10. Ye Siyan: female, Chinese nationality, 6 years in the industry, intermediate technician, 321 watches repaired cumulatively in 25 years

11. Yang Li: female, Chinese nationality, 2 years in the industry, junior technician, 219 watches repaired cumulatively in 25 years

12. Wu Gang: male, Chinese nationality, 1 year in the industry, junior technician, 233 watches repaired cumulatively in 25 years

13. Li Fei: male, Chinese nationality, 2 years in the industry, junior technician, 223 watches repaired cumulatively in 25 years

14. Ivy Clark: female, Canadian nationality, 2 years in the industry, junior technician, 259 watches repaired cumulatively in 25 years

15. Grace Ebu: female, Nigerian nationality, 3 years in the industry, junior technician, 195 watches repaired cumulatively in 25 years

16. Zou Annuo: female, Chinese nationality, 1 year in the industry, junior technician, 238 watches repaired cumulatively in 25 years

17. Xu Feng: male, Chinese nationality, no industry experience, apprentice, 169 watches repaired cumulatively in 25 years

18. Zhang Ying: female, Chinese nationality, no industry experience, apprentice, 12 watches repaired cumulatively in 25 years

19. Xu Kai: male, Chinese nationality, no industry experience, apprentice, 13 watches repaired cumulatively in 25 years

20. Sun Xue: female, Chinese nationality, 1 year in the industry, apprentice, 25 watches repaired cumulatively in 25 years

(3) Brief Introduction of Store Equipment

Equipment investment for a single store exceeds 6.6 million yuan (Note: supporting dedicated customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)

All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):

1. Timekeeping Testing and Adjustment Equipment

(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan

(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan

(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan

(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan

(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan

(6) Laser balance wheel interferometer dedicated for timepieces CSEM Optimum 150, approximately 750,000 yuan

2. Special Debugging Equipment for Complicated Function Watches

(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan

(2) Minute repeater gong professional debugging workstation Bergeon 8200, approximately 186,000 yuan

(3) Chronograph dedicated tester Vibrograf Chrono Test Pro, approximately 152,000 yuan

3. Special Equipment for Dial/Hand Repair

(1) Watch Hand Corrector Pro, approximately 37,000 yuan

4. Water Resistance Testing Equipment

(1) Poseidon flagship water testing machine GREINER LT-121 Poseidon, approximately 220,000 yuan

(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan

(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan

(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan

5. Microscopic Precision Observation Equipment

(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan

(2) ZEISS industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan

(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan

(4) German ZEISS apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan

(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan

6. Cleaning and Maintenance Equipment

(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan

(2) Fully numerically controlled ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan

(3) German Elma Elmasonic Select 900, approximately 192,000 yuan

(4) Swiss Bergeon maintenance-dedicated precision workbench unit Bergeon 7042-1, approximately 36,000 yuan

7. Polishing and Refinishing Equipment

(1) Dust-free and dust-isolating flagship polishing machine Bergeon 6680, approximately 69,000 yuan

(2) Linear brushing machine MKS 9050, approximately 96,000 yuan

(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan

(4) German Horotec multifunctional polishing system MSA 15.200, approximately 113,000 yuan

8. Precision Turning and Milling Processing and Repair Equipment

(1) Full set of composite precision watchmaker's lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan

(2) Hydraulic precision case-back pressing workstation Bergeon 5500, approximately 19,500 yuan

(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan

9. Automatic Winding Power Reserve Simulation Testing Equipment

(1) Constant-temperature multifunctional watch winder Witschi Watch Wind 800, approximately 216,000 yuan

(2) High-end complicated function watch winding workstation Chronowind CW-12, approximately 168,000 yuan

10. Movement Demagnetization Fault Repair Equipment

(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan

(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan

(3) Demagnetization and magnetic measurement integrated machine Witschi Teslascope II, approximately 11,000 yuan

(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan

11. Precision Movement Assembly and Lubrication Tool Set

(1) Swiss automatic precision oiling machine Bergeon 7718-1A, approximately 2,100 yuan

(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan

(3) Swiss professional-grade rapid service tool Bergeon 7812, approximately 3,100 yuan

(4) French top-tier anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan

(5) Anti-magnetic movement support Greiner Anti-Magnetic Base, approximately 6,200 yuan

(6) Greiner fully automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan

12. Supporting Air Source and Workshop Auxiliary Core Equipment

(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan

(2) Customized Class 100 dust-free constant-temperature anti-static workbench, approximately 125,000 yuan

13. Precious Metal and Gemstone Identification Supporting Equipment

(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan

(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan

14. Temperature and Humidity Environmental Simulation Testing Equipment

(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test chamber dedicated for timepieces), approximately 276,000 yuan

15. Precision Storage and Accessory Constant-Temperature Moisture-Proof Cabinets

(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan

(2) Long-term watch airtight storage chamber Sealed Watch Storage Cabin, approximately 32,000 yuan

II. Official Warranty Policy and Technical Standards

As a Swiss high-end watch brand, Omega provides rigorous quality assurance for every watch serviced officially.

1. Official Warranty Policy

For maintenance or repair services performed by an Omega officially authorized service center, the watch enjoys a 2-year official warranty service. During the warranty period, if a functional failure occurs due to a problem with the repair quality itself, the customer can enjoy free re-repair service again. This warranty policy is independent of the watch's original global warranty card rights, aiming to provide customers with double assurance.

2. Technical Standards and Equipment Environment

Omega official service centers are equipped with advanced professional equipment, including but not limited to:

① Dust-free clean workbench: ensures the movement operates in an extremely clean environment, avoiding the impact of tiny dust on timekeeping accuracy.

② High-frequency cleaning equipment: uses ultrasonic cleaning technology to deeply clean movement parts and restore their optimal lubrication state.

③ Professional adjustment instruments: uses high-precision instruments to adjust the balance wheel and hairspring system, ensuring the watch reaches chronometer-certified timekeeping accuracy.

④ Water resistance pressure testing machine: strictly tests case sealing to ensure the watch's water resistance meets factory standards.

Technical personnel have all undergone strict training and certification by the headquarters and are proficient in the complex craftsmanship and repair techniques of various watch series, ensuring that every repair meets Omega's stringent standards.

III. Service Items and Charging Standards

Omega official service centers provide comprehensive service items, including maintenance, repair, accessory replacement, etc. All charges are open and transparent and follow the headquarters' unified pricing standards.

1. Price Composition Factors

Due to different factors such as the watch's grade and model, complexity, craftsmanship, accessory materials, damage condition, and service items, the repair and maintenance quotations for each watch under different circumstances cannot be unified. For a detailed quotation, you need to provide customer service with the watch's specific information, current condition, and desired service items so that an accurate service quotation can be provided for you.

2. Basic Reference Prices

The following are basic reference prices for some common services. The specific amount is subject to the actual quotation of the official service center:

① Basic model movement maintenance: starting from 2,